[China Glass Net] First, the installation method of stainless steel glass door
1. Positioning of the pay-off: At the beginning of installation, the stainless steel glass door must be positioned for the fixed glass partition and the movable glass door fan. The position of the door frame is determined, and the ground level and the top level of the door frame are accurately measured.
2. Install the stainless steel glass door frame top limit slot: take two metal decorative board edges from the center line of the bullet, and then install the limit slot at the top of the door frame according to the edge line.
3. Install the wooden bottom of the stainless steel glass door metal finish: nail the square wood on the original pre-buried wooden brick, or fix the square wood on the ground by expanding the bolts, and then stick the metal decorative panel with the multifunctional glue. On the wooden side.
4. Install the rigid door frame: nail the door frame according to the center line of the bullet, and then use plywood to determine the size and position of the door frame column. When it is fixed, the metal decorative surface is then wrapped.
5, stainless steel glass door glass door installation: use a glass suction cup (or glass suction cup machine) to suck the thick glass, then hold the suction cup to lift the thick glass plate through 2 to 3 people and erect it to install The location is ready to be in place.
6. Glass fixing: Two flat wooden strips on the bottom and bottom of the bottom are sandwiched by thick glass, but a thick space of 4 mm is required to leave a thick glass plate, and then the multifunctional strip is applied on the flat wooden strip. The glue sticks the veneered metal plate to the square wood and the two flat wooden strips.
7. Injection glass seal: Inject the glass glue into the gaps on both sides of the top root groove and on both sides of the glass tray and the joint between the thick glass and the door frame column.
8. Docking between glass of stainless steel glass door: thick glass plate with fixed part, because the width is too large, it must be assembled by two or more pieces. The two pieces of aligned splicing must form a seam, and the joint should be Leave a distance of 2 to 3 mm.
Second, the installation points of stainless steel glass doors
1. Before all the installation steps are started, it must be ensured that the other processes of the interior decoration and decoration are basically completed before the construction is completed, and the positioning of the alignment should be strictly in accordance with the design drawings.
2, the width of the limit groove at the top of the stainless steel glass door frame should be greater than the thickness of the glass 2 ~ 4mm, the groove depth is between 20 ~ 30mm, in order to glue.
3. When wrapping the metal decorative surface, place the decorative face-to-head seam in the middle of the sides of the mounting glass. The seam location must be accurate and vertical.
4. When placing the glass door leaf of the stainless steel glass door, the method of seating is: insert the upper part of the glass into the limit groove at the top of the door frame, then place the lower part of the glass on the center line on the bottom support, and the right side frame The installation position makes the sides of the thick glass just seal the metal frame of the door frame facing the seam, and it is required that the seam joints are not visible inside or outside.
5. When sealing the glass seal, the injection sequence should be terminated from the end of a certain gap to the end, and must not stop in the middle.
6. During the docking process between the glass of the stainless steel glass door, the glass cut of the joint must be used, and after the glass is fixed, the glass should be glued into the gap. After filling, the plastic sheet should also be scraped. Flat, so that the gap forms a clean and uniform straight line, and the glass surface should be cleaned with a clean cloth.
Stainless steel glass doors must be installed in the correct way to extend their service life, and more importantly, to ensure that the glass doors are not accidentally damaged by accidental installation.
Complex Stitch Bond Fabeic,Customized Standard Stitch Bonded Fabrics,Unique Design Stitch Bonded Fabrics,Hot Sale Stitch Bonded Fabrics
yizheng jiayu textile products co.,ltd , https://www.jystitchbond.com