Jewelry will have different dirt after wearing for a period of time. It will not shine out of the original luminosity. Your jewelry needs to be cleaned. What method does gold jewelry use to clean it?
1. Gold jewelry after wearing is often tarnished by stains and dust. At this time, just put the gold jewelry in a neutral detergent and soak it in warm water and clean it, then remove it and wipe it dry.
2, the gold ring and the platinum ring wear the same hand, it is easy to cause the two to rub each other, so that the gold ring is partially covered with platinum and white. With regard to such a white gold jewellery, it can be polished with an agate knife, or it can be rubbed with a coarse cloth (such as canvas) to restore the gold.
3, pure gold jewelry due to sweat or air pollution caused by the loss of luster, can be placed in neutral lotion warm water or commercially available maintenance liquid for a few minutes, then light rubbing with quality.
4. If there is a black silver film on the outside, use 2 grams of salt, 7 grams of baking soda, 8 grams of bleaching powder, 60 ml of water, and make a “golden cleanerâ€. Put the gold jewelry in a bowl and pour it into the clean. After 2 hours, remove the gold jewelry, rinse with water (preferably not hard water), bury it in wood chips, and then wipe it with a soft cloth.
5, toothpaste wipe or wipe with hot rice soup, can also restore luster.
6, clean gold jewelry, the use of warm and gentle Panyu and soft hair brush is the most simple and convenient way.
7, pure gold jewelry in the case of mercury will undergo chemical changes, showing white mottled, must be grilled on the alcohol lamp for a while, can restore the original color.
8. Gold jewelry that is often worn should be cleaned and inspected once a month.
Medical endoscope lens, lens optic, high quality medical lens, lens for medical
Dongguan Shengqiang Electronic Co.,Ltd , https://www.sqoptical.com